product details

Power Unit for Tyre Press

  • FEATURES

    This hydraulic power unit is made up of high pressure gear pump, AC motor, multi-manifold, hydraulic valve, oil tank, etc. It is designed fortyre press, controling 3 sets of double-acting cylinder.


Specifications

Modle Motor Disp. (cc/r) Tank Cap. (L) Pressure (MPa) Installation Port Size
AC-F 40-3.2/F-1.5/380/1440/**-6H-C 380V 1.1KW 1440RPM 50Hz 2.5 6 17 Horizontal G 1/4
AC-F 40-4.2/F-2.2/380/1440/**-6H-C 380V 2.2KW 1440RPM 50Hz 3.2 4.2

Notice

  1. This power unit is S3 working type, can not work continuously, can work repeatedly.
  2. Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
  3. Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
  4. This power unit is horizontal installation.
  5. After first work, oil tank should be checked immediately to see if there's enough oil.
  6. After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

NAVIGATION

CONTACT

mail: jst@justrontech.com

ADD

Building A,NO,8 Shuibian Road,Taiping Community,
DaliTown,Nanhai District,Foshan ciry,Guangdong province

Foshan Jiashitong Technology Co. , Ltd. Site by Ceall.net.cn