Power Unit for Pallet Truck

FEATURES

This hydraulic power unit is made up of high pressure gear pump, AC motor, multi-manifold, hydraulic valve, oil tank, etc. It used at the power origin of light fork truck and pallet truck, Electromagnetic unloading valve unloading to oil return, decline speed is controlled by pressure compensating flow control valve.

Specifications

Modle	Motor	Disp. (cc/r)	Tank Cap. (L)	Pressure (MPa)	Installation	Port Size	L (mm)
DC-F 10-0.5/E-0.8/12/**-1H-C	12V 0.8KW 3650RPM	0.5	1.0	16	Horizontal	G 1/4	178
DC-F 10-0.75/E-0.8/12/**-1.2H-C	12V 0.8KW 3650RPM	0.75	1.2				210
DC-F 10-0.5/E-0.8/24/**-1H-C	24V 0.8KW 3650RPM	0.5	1.0				178
DC-F 10-0.5/E-0.8/24/**-1.7H-C	24V 0.8KW 3650RPM	0.75	1.7				170
Introductions: 1. If heed specifications like: pumps with different flow, pressure, motor power, please see the modelntroductions of hydraulic power unit. 2. If need hand emergent drain oil unit, please tell us when ordering products.

This power unit is S3 working type, can not work continuously, can work repeatedly.
Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
This power unit is horizontal installation.
After first work, oil tank should be checked immediately to see if there's enough oil.
After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.