product details

Power Unit for Hydraulic Scissorlift

  • FEATURES

    This power unit use no-leak Dual way check valve to realize the complete isolation of two line. It make this two line totally independent in the action of lift and fall. It’s the ideal hydraulic power for multiple cylinder single lift system. This power unit widely used in primary and secondary (bigscissor) fork lifter.

Specifications

Modle Motor Disp. (cc/r) Tank Cap. (L) Pressure (MPa) Installation Port Size
AC-ZC 9-2.1/F-2.2/220/2850/**-20V-C 220V 2.2KW 2850RPM 50Hz 2.1 20 20 Vertical G 1/4
AC-ZC 9-2.1/H-3.0/220/2850/**-20V-C 220V 3.0KW 2850RPM 50Hz 26
AC-ZC 9-2.1/G-2.2/380/2850/**-20V-C 380V 2.2KW 2850RPM 50Hz 22
AC-ZC 9-2.1/H-3.0/380/2850/**-20V-C 380V 3.0KW 2850RPM 50Hz 28

Notice

  1. This power unit is S3 working type, can not work continuously, can work repeatedly.
  2. Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
  3. Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
  4. This power unit is Vertical installation.
  5. After first work, oil tank should be checked immediately to see if there's enough oil.
  6. After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

NAVIGATION

CONTACT

mail: jst@justrontech.com

ADD

Building A,NO,8 Shuibian Road,Taiping Community,
DaliTown,Nanhai District,Foshan ciry,Guangdong province

Foshan Jiashitong Technology Co. , Ltd. Site by Ceall.net.cn