Micro Power Unt for Medical Equipment

FEATURES

This hydraulic power unit is designed specifically for electric surgical tables in medical equipment, with low noise, low current, and lightweight design, providing a hydraulic power source for the surgical table. Also applicable to electric hospital beds.

Specifications

Modle	Motor	Disp. (cc/r)	Tank Cap. (L)	Pressure (MPa)	Installation	Port Size
DC-F 10-0.25/D-0.5/24/**-1H-C	24V 0.5KW 2000RPM	0.25	1.0	10	Horizontal	G 1/4
DC-F 10-0.5/D-0.5/24/**-1H-C	24V 0.5KW 2000RPM	0.5	1.0	6.5	Horizontal	G 1/4
Introductions: If need specifications like: pumps with different flow, pressure, motor power, please see the model introductions of hydraulic power unit.

This power unit is S3 working type, can not work continuously, can work repeatedly.
Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
This power unit is horizontal installation.
After first work, oil tank should be checked immediately to see if there's enough oil.
After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

mail: jst@justrontech.com

Building A,NO,8 Shuibian Road,Taiping Community,
DaliTown,Nanhai District,Foshan ciry,Guangdong province