product details

Power Unit for Automobile Tail Plate

  • FEATURES

    This hydraulic power unit is madhiup ofgh pressure gear pump, AC motor, multi-manifold. hydraulic valve, oil tank, etc. It provide lift, down,open and close functionfor automobile tail plate, box type combination isconvenient for transportation installation.

  • Stand-up kaidrori

  • Sanitation trucks

  • For Europe

Specifications

Modle Motor Disp. (cc/r) Tank Cap. (L) Pressure (MPa) Installation Port Size
DC-WB 15-2.1/F-2.0/12/**-9H-A 12V 2.0KW 2500RPM 2.1 8 18 Horizontal M1 181.5
DC-WB 15-2.1/F-2.2/24/**-9H-A 24V 2.2KW 2500RPM
DC-WB 16-2.1/F-2.2/12/**-10H-A 12V 2.2KW 2500RPM 2.5 10
DC-WB 16-2.1/F-2.8/24/**-10H-A 24V 2.8KW 3200RPM 3.2

Notice

  1. This power unit is S3 working type, can not work continuously, can work repeatedly.
  2. Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
  3. Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
  4. This power unit is horizontal installation.
  5. After first work, oil tank should be checked immediately to see if there's enough oil.
  6. After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

NAVIGATION

CONTACT

mail: jst@justrontech.com

ADD

Building A,NO,8 Shuibian Road,Taiping Community,
DaliTown,Nanhai District,Foshan ciry,Guangdong province

Foshan Jiashitong Technology Co. , Ltd. Site by Ceall.net.cn