Power Unit for Dock Leveler

FEATURES

This hydraulic power unit is made up fohigh pressure gear pump, AC motor, multi-manifold hydraulic valve, oil tank, etc. It enable the dock leveler Axle lift have the function of making unequal-sized bridge plate lift and fall and close up. It could control 2 single actingcylinder.

Specifications

Modle	Motor	Disp. (cc/r)	Tank Cap. (L)	Pressure (MPa)	Installation	Port Size
AC-DCQ 32-3.2/E-1.5/380/1440/**-6H-C	380V 1.1KW 1440RPM 50Hz	2.5	6	17	Horizontal	G 1/4

This power unit is S3 working type, can not work continuously, can work repeatedly.
Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
This power unit is horizontal installation.
After first work, oil tank should be checked immediately to see if there's enough oil.
After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

mail: jst@justrontech.com

Building A,NO,8 Shuibian Road,Taiping Community,
DaliTown,Nanhai District,Foshan ciry,Guangdong province