product details

Power Unit for Vehicle Lift

  • FEATURES

    This hydraulic power unit is made up of high pressure gear pump, AC motor, multi-manifold hydraulic valve, oil tank, etc. It enable the two post vehicle lift have the function of lift and fall, The throat valve can control fall speed.

Specifications

Modle Motor Disp. (cc/r) Tank Cap. (L) Pressure (MPa) Installation Port Size L (mm)
AC-Q 5-2.1/F-2.2/220/2850/**-10V-D 220V 2.2KW 2850RPM 50Hz 2.1 10 20 Vertical G 3/8 440
AC-Q 5-2.7/F-2.2/220/2850/**-12V-D 2.7 12 18 545
AC-Q 5-2.1/F-2.2/380/2850/**-10V-D 380V 2.2KW 2850RPM 50Hz 2.1 10 20 440
AC-Q 5-2.7/F-2.2/380/2850/**-12V-D 2.7 12 18 545

Notice

  1. This power unit is S3 working type, can not work continuously, can work repeatedly.
  2. Before installation, please be sure the cleanliness of component like tank, tube and fittings, without any impurities.
  3. Viscosity of oil should be 15-68CST, should be clean and without impurities. Suggest to use N46 hydraulic oil, If need to work all-weather, must use aviation hydraulic fluid.
  4. This power unit is Vertical installation.
  5. After first work, oil tank should be checked immediately to see if there's enough oil.
  6. After the first 100 working hour, hydraulic oil should be replaced. After that, the oil should be replaced every 3000 working hours.

NAVIGATION

CONTACT

mail: jst@justrontech.com

ADD

Building A,NO,8 Shuibian Road,Taiping Community,
DaliTown,Nanhai District,Foshan ciry,Guangdong province

Foshan Jiashitong Technology Co. , Ltd. Site by Ceall.net.cn